中央供料系統（集中供料系統）稱重式混料機，吸料機，吸粉機，真空上料機，氣力輸送機，真空加料機，中央供料系統廠家,提供注塑機中央供料系統、塑料中央供料系統、自動供料系統、注塑機集中供料系統，模溫機(壓鑄模溫機），工業冷水機，色母機，塑料粉碎機，高速脫油機，塑料干燥機，三機一體除濕機（塑料除濕干燥機），真空輸送機，輸送稱重系統，金屬分離器，。
產品中心
PRODUCT CENTER
- 聯系人 : 曹鏡森先生
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 移動電話 : 13925217478
- 地址 : 中國 廣東省東莞市大朗鎮仙村工業區
- Email : caojingshen@126.com
- 郵編 : 523792
- 公司網址 : http://www.gameslessordinary.com
- MSN : caoshingcer@126.com
- QQ : 454992321
文章詳情
瓶胚高速注塑干燥系統之二
日期：2026-02-01 01:22
瀏覽次數：3
摘要：瓶胚高速注塑干燥系統之二，高速注塑機，PET瓶胚，PET干燥系統
瓶胚高速注塑干燥系統之二，高速注塑機，PET瓶胚，PET干燥系統
二、系統核心定義與主流類型
瓶胚高速注塑干燥系統是集成PET 切片預結晶、深度除濕干燥、密閉恒溫輸送、熱風再生循環、智能工藝聯動的一體化聚酯干燥系統，專為瓶胚高速注塑的工藝需求定制。
The drying system for high-speed preform injection moulding is an integrated polyester drying system integrating PET chip pre-crystallization, deep dehumidification drying, airtight constant temperature conveying, hot air regeneration cycle and intelligent process interconnection, customized exclusively for the process requirements of high-speed preform injection moulding.
系統的核心目標是在連續供料的前提下，將 PET 切片含水率穩定降至≤20ppm，結晶度精準控制在 25%~35%，且切片無二次吸濕、無降解、干燥均勻，為高速注塑提供合格原料。
The core goal of the system is to stably reduce the moisture content of PET chips to ≤20ppm under the premise of continuous feeding, accurately control the crystallinity at 25%~35%, and ensure that the chips have no secondary moisture absorption, no degradation and uniform drying, so as to provide qualified raw materials for high-speed injection moulding.
根據設備集成度和產能適配性，瓶胚高速注塑干燥系統主要分為三機一體集成式、分體式組合、真空強化式三類，其中三機一體集成式因占地小、控制集成、聯動性強，成為 96 腔及以上高速生產線的市場主流。
According to equipment integration and capacity adaptability, the drying systems for high-speed preform injection moulding are mainly divided into three types: three-in-one integrated type, split combined type and vacuum enhanced type. Among them, the three-in-one integrated type has become the market mainstream for high-speed production lines with 96 cavities and above due to its small footprint, integrated control and strong interconnection.
1. 三機一體集成式
三機一體集成式將預結晶器、除濕干燥機、密閉上料機集成于一體，結構緊湊，占地僅為分體式的 1/3，適配車間空間狹小的高腔數生產線。
The three-in-one integrated type integrates the pre-crystallizer, dehumidification dryer and airtight feeder into one body, with a compact structure and only 1/3 of the footprint of the split type, adapted to high-cavity production lines with narrow workshop space.
系統采用 PLC 集中控制，預結晶、干燥、輸送參數聯動調控，露點穩定在 - 40℃~-70℃，適配 48~288 腔瓶胚生產線，產能覆蓋 0.5~8t/h，是目前瓶胚高速注塑的主流選擇。
The system adopts PLC centralized control, with linked regulation of pre-crystallization, drying and conveying parameters, and the dew point is stable at -40℃~-70℃, adapted to 48~288 cavity preform production lines with a capacity coverage of 0.5~8t/h, which is the current mainstream choice for high-speed preform injection moulding.
The three-in-one integrated type integrates the pre-crystallizer, dehumidification dryer and airtight feeder into one body, with a compact structure and only 1/3 of the footprint of the split type, adapted to high-cavity production lines with narrow workshop space.
2. 分體式組合系統
分體式組合系統由獨立的臥式 / 塔式預結晶器、雙塔 / 轉輪除濕干燥塔、真空輸送機組合而成，可根據產能靈活搭配，適配 32~96 腔中小產能瓶胚生產線。
The split combined system is composed of independent horizontal/tower pre-crystallizer, double-tower/rotary dehumidification drying tower and vacuum conveyor, which can be flexibly matched according to capacity and adapted to small and medium capacity preform production lines with 32~96 cavities.
該系統的優勢是單設備維護方便、后期可擴容升級，缺點是占地大、各設備參數需手動聯動調節，控溫精準度略低于集成式，適合瓶胚量產初期的中小生產線。
The advantage of this system is that the single equipment is easy to maintain and can be expanded and upgraded in the later stage, while the disadvantages are large footprint, manual linked adjustment of each equipment parameter, and slightly lower temperature control accuracy than the integrated type, which is suitable for small and medium production lines in the early stage of mass preform production.
3. 真空強化式干燥系統
真空強化式干燥系統在常規除濕干燥基礎上增加真空腔室，采用負壓環境進行干燥，可將干燥時間縮短 30%~50%，切片含水率可降至≤10ppm，適配醫藥、食品級**瓶胚生產線。
The vacuum enhanced drying system adds a vacuum chamber on the basis of conventional dehumidification drying, and adopts a negative pressure environment for drying, which can shorten the drying time by 30%~50% and reduce the chip moisture content to ≤10ppm, adapted to high-end pharmaceutical and food-grade preform production lines.
系統的核心優勢是干燥效率高、切片熱降解風險極低，缺點是設備造價高、維護要求嚴格，僅用于對瓶胚潔凈度、力學性能要求極高的**應用場景。
The core advantages of the system are high drying efficiency and extremely low risk of chip thermal degradation, while the disadvantages are high equipment cost and strict maintenance requirements, which are only used in high-end application scenarios with extremely high requirements for preform cleanliness and mechanical properties.
三、系統核心組成與部件功能
瓶胚高速注塑干燥系統圍繞 **“連續、均勻、低濕、防吸濕”的核心要求設計，三機一體集成式為行業主流，整體由預結晶模塊、除濕干燥模塊、密閉輸送模塊、熱風再生模塊、智能控制模塊、保溫輔件模塊 ** 六大核心模塊組成。
The drying system for high-speed preform injection moulding is designed around the core requirements of "continuous, uniform, low humidity, moisture-proof", with the three-in-one integrated type as the industry mainstream, and the whole system is composed of six core modules: pre-crystallization module, dehumidification drying module, airtight conveying module, hot air regeneration module, intelligent control module and thermal insulation accessory module.
各模塊高度集成、協同工作，實現 PET 切片從原料上料到干燥成品送至注塑機料斗的全程密閉、無二次吸濕、參數精準可控，完全匹配高速注塑的工藝節拍。
All modules are highly integrated and work together to realize the whole process airtight, no secondary moisture absorption, and precise and controllable parameters of PET chips from raw material feeding to dried finished products sent to the hopper of the injection moulding machine, which fully matches the process cycle of high-speed injection moulding.
